Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Brand: NHG
Packaging: Wooden Cases
Productivity: 500 /Year
Transportation: Ocean,Land,Air
Place of Origin: PRC
Supply Ability: 500
Port: DALIAN SEAPORT,TIANJIN SEAPORT,SHANGHAI SEAPORT
Payment Type: L/C,T/T
Incoterm: FOB,CIF
Backhoe Loader with Auger Drilling Rig
The Drill Loader is a further development of continuous loaders with twin gathering arms. In the course of its development the operating experience of loaders was taken into consideration and all the defects typical of those machines were eliminated.
The machines proved themselves to be highly reliable and convenient in operation. The reduction gears having a reduced diameter of output shaft seal used in the design of a gathering element and the bevel gearing of the second shaft have eliminated the main drawback of machines, i.e. clogging of reduction gears’ arms, and as a consequence – breakdown of bearings and reduction gears.
Advantage:
· Safe RC drill rod-handling operations
· Faster load and unload cycles
· Cup design using gravity ensures excellent inherent safety
· Single operator function from remote point
· Available in remote control, pilot hydraulic and direct hydralic configuration
· Reduces manual rod lifting
No. | Specification | Remark | |
Whole Parameters | Total dimension (L×B×H)(m) | 11.60×2.50×3.20 |
|
| Total weight(t) | 38 |
|
| Power Supply (V) | AC1140/660 |
|
| Working range of positioning drilling (m) | 6.8×4.7 |
|
| working range of positioning and loading(m) | 5.5×4.0 |
|
| Scooping range (m) | 2.9 |
|
| Ground pressure (MPa) | ≤0.13 |
|
| Suitable rock hardness (MPa) | ≤160 |
|
| Ground clearance (mm) | 350 |
|
| Maximum height of rear supporting (m) | ≤1.65 |
|
| System rated pressure (MPa) | 23 |
|
| Cable reel distance (m) | 60 |
|
| Whole machine power (Kw) | 132 |
|
| Maximum non-removable part | 2.8×1.1×1.78 |
|
|
| 5.01×0.92×0.81 |
|
Blast hole drill arm | Blast hole diameter (mm) / maximum depth (m) | φ38-45/3.0 |
|
| Number of booms (pcs) | 2 |
|
| Up and down lifting angle (°) | -15--+60 |
|
| Swing angle from left to right (°) | ±35 |
|
| Pitch angle (°) | -6--+90 |
|
| Single penetration depth (m) | 3.0 |
|
| way to control | 手动 |
|
| Propulsion force (kN) | 10 |
|
Bolter arm | Bolter hole diameter (mm)/depth (m) | Φ28-Φ32/1.6-8.0 | manually |
| Number of anchor arms (a) | 1 |
|
| Up and down lifting angle (°) | -15--+60 |
|
| Swing angle from left to right (°) | ±35 |
|
| Pitch angle (°) | -6--+90 |
|
| Single penetration depth (m) | 1.6/2.4. |
|
| way to control | Remote control |
|
| Propulsion force (kN) | 10 |
|
Hydraulic system | System rated flow (L/min) | 578 |
|
| Hydraulic oil tank volume (L) | 600 |
|
| cooling method | Water cooling |
|
| Water supply volume (L/min) | 80 |
|
| Water supply pressure (MPa) | 1.5—3.0 |
|
| Air supply pressure (MPa) | 0.6 |
|
| Bucket width (m) | 0.6 |
|
Collection and transportation | Chute width (m) | 0.74 |
|
| Shipping capacity (m3/h) | 300 |
|
| First transportation chain speed (m/min) | 50 |
|
| Conveying angle (°) | 13.5 |
|
| Shovel width (m) | 2.5/3.0/3.5 |
|
| Width of folding push plate (m) | 0.5 | bilateral symmetry |
Digging arm | Digging width (m) | 5.5 |
|
| Digging distance (m) | 2.9 |
|
| Digging height (m) | 4.5 |
|
| Digging depth (m) | 1.0 |
|
| Bucket width (m) | 0.6 |
|
| Bucket volume (m3) | 0.3 |
|
| Broken width (m) | 4.7 |
|
Electrical system | Rated current (A) | 67.4/116.7 |
|
| Rated speed (r/min) | 1480 |
|
Supporting platform | Supporting platform size (L×B×H) (m) | 1.2×0.75×1.2 | For 3 persons at the same time |
Our Company
North Heavy Gryps Equipment And Engineering Co., Ltd. (hereinafter referred to as NHG) was established in 2013. The company is headquartered in Shenyang Economic & Technological Development Zone which is honored by the State Department as [ Two Modeling Park" of national equipment manufacturing. As the chief company of North.T, NHG is specialized in the R&D, manufacturing and sales of mining and tunneling equipment with more than 2000 employees (including construction personnel) worldwide, more than 2,000 equipment and more than 300 construction projects providing services to different customers in more than 10 countries around the world.
The company has established branches and offices in Southeast Asia (Laos), South Asia (India), West Asia (Turkey), Russian (Russia), South America (Venezuela), Africa (South Africa) and other countries. A regional operation network with equipment sales, service and parts supply, engineering construction and freight forwarding has been established. The 24 × 365 service is implemented to meet the user's requirements to the greatest extent.
Product Categories : Coal Mining Machinery > Drill Loader
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.